Graffiti Melt®... the far more innovative and cost-effective solution than paint-outs or sandblasting.
Over the years, millions of dollars have been spent combatting graffiti vandalism. Methods such as paint-outs and sandblasting have proven to be worse than the graffiti itself, not to mention costly and time consuming.
With Graffiti Melt, your best defense is a smart offense. Graffiti Melt is a sacrificial coating, meaning that you apply it on the surfaces you want protected beforehand and Graffiti Melt imposes a barrier between the graffiti and the underlying surface. Graffiti is blocked by Graffiti Melt, ready to be removed one of two ways: either a hot water pressure washer or with Graffiti Eaze Away Remover, at the rate of 10 minutes per 100 square feet. Once the vandalism's been removed, simply re-apply Graffiti Melt to the cleaned area and you're protected from future attacks once again.
Graffiti Melt is affordable, unobtrusive, and very easy to use.
Where permanent coatings are usually noticeable, Graffiti Melt is composed of water and food grade materials that create a tough barrier without altering the appearance or texture of the treated surface. Where permanent coatings are expensive, Graffiti Melt costs pennies per square foot.
On a clean surface, one person can apply Graffiti Melt at the rate of 2,000 square feet an hour. Drying time is between 15 and 30 minutes. It's not necessary to apply a sealer coat on porous surfaces. Just apply it straight from the container, no mixing or thinning required. Because Graffiti Melt is vapor permeable, trapped moisture can escape without damaging the surface.
Graffiti Melt works on a variety of painted and non-painted surfaces.
- brick, concrete, stucco
- wood, stone, marble
- bridges
- phone booths and mailboxes
- switch boxes and transformers
- street signs
- statues, benches and planters
- power and light poles
- murals and billboards
Contact us today and you'll soon be waging a much smarter war against vandalism.