Neutral Clean 7 has the neutral pH necessary to clean D&D coated floors
Neutral Clean 7 is a highly concentrated liquid cleaner made especially for the unique characteristics of D&D coated floors. The cleaner has a neutral pH at use dilutions to clean without penetrating the floor finish or hurting its gloss. Special detergents leave no dulling film or haze but actually maintain the luster of the floors. To maintain D&D's warranty, customers must use a neutral pH cleaner such as Neutral Clean 7.
- No film: Special detergents lift and suspend soil so that it will not redeposit and thus requires no rinsing
- Economical: Highly concentrated; just an ounce or two per gallon of water removes heavy soil
- Neutral pH: Safe on any surface not harmed by water alone. A true all-purpose cleaner
- Hard water tolerant: Effective in hot or cold, hard or soft water
How To Use
For Damp Mopping: Mix approximately 2 - 4 ounces of neutral cleaner per gallon of water. Apply as you would an ordinary cleaner, but there's no need to rinse.
For Automatic Scrubbing Machines: Mix approximately 1 - 2 ounces of neutral cleaner per gallon of water in the solution tank. Apply, scrub and pick-up as you would ordinary low-foam cleaners. No need to rinse.
For General Cleaning: Depending on the level of soil, mix 2 - 4 onces of neutral cleaner per gallon of water. Apply liberally with a mop, cloth, sponge, or sprayer, but do not flood. Allow solution to stand a minute or two, then remove. Rinsing is not necessary.